When an air conditioner won’t start, shows an error code, trips the breaker or behaves erratically, the cause is usually electrical or electronic. We trace the actual fault methodically rather than swapping parts on a guess, then explain it in plain terms.
What's included
- Reading and interpreting unit error codes
- Testing the main control / PCB board
- Checking temperature and pressure sensors
- Inspecting wiring, capacitors and the compressor circuit
- Verifying the power supply and breaker
- A clear written diagnosis and a fixed repair quote
You get a clear report and a fixed quote before any repair begins — no guesswork, no surprise parts.
Diagnostics prices
The price depends on the AC type, the location and how complex the fault is. Tell us the model, the address and the symptom for an exact figure.
- On-site fault findingfrom 60 ₾
- Water-leak check (AC dripping water)from 50 ₾
Recent work
Frequently asked questions
How much does air conditioner diagnostics cost in Batumi?
On-site fault finding with Imia is from 60 GEL, and a water-leak check on an AC dripping water is from 50 GEL. The exact figure depends on the type of unit, the location and how complex the fault is. You get a written diagnosis and a fixed repair quote before any repair work begins.
What does the diagnostic visit include?
A full electrical and mechanical check: supply voltage and the breaker, the PCB and control board, sensors, the capacitor, the fan and compressor, wiring and connections, refrigerant pressures, airflow, drainage and any stored error codes. You are shown what has failed and why, then quoted a fixed price for the repair before anything is replaced.
My air conditioner will not turn on — what is wrong?
The usual causes, in order: no power at the socket or a tripped breaker, dead remote batteries or a failed remote, the unit sitting in protection mode after a fault, a failed capacitor, or a failed PCB/control board. Imia identifies which on site in Batumi from 60 GEL, and most of these are fixed on the first visit.
Do you repair control boards, sensors and wiring?
Yes — electrical diagnostics and repair is a core service: PCB and control boards, temperature and pressure sensors, capacitors, contactors, wiring and terminal connections on both indoor and outdoor units. Where a board can be repaired we repair it; where it must be replaced, Imia tells you the part cost before ordering.
My air conditioner trips the breaker — is that dangerous?
Treat it as urgent and stop using the unit. A tripping breaker usually means a short in the compressor or fan winding, water reaching an electrical connection, a failed capacitor or damaged cable insulation — all fire and shock risks, and repeatedly resetting the breaker makes it worse. Call Imia for an electrical diagnosis from 60 GEL.
What does an error code on the display mean?
Every manufacturer uses its own code set, so an E1 on a Gree and an E1 on a Midea are different faults — the codes generally point to sensors, pressure, communication between indoor and outdoor units, or the drain pump. Send Imia the code and the model number and we can usually narrow the fault down before the visit.
What information do you need to give me a price?
Three things: the make and model from the label on the indoor unit, the address or district in Batumi, and a description of the symptom — no cooling, water dripping, noise, will not start, or an error code on the display. With those, Imia can give you a much tighter figure than a generic call-out price.
